Where Is The Reset Button On Furnace?
Before it gets too cold, it is highly suggested to contact a professional HVAC specialist for furnace inspection in Severna Park, MD. With a functional furnace, you can maintain a comfortable interior temperature during winter.
Alternatively, if your furnace fails, you may soon find yourself living uncomfortably indoors. Due to this, it is necessary to identify and resolve any problems involving your furnace as quickly as possible.
1. What is a Furnace's Reset Button?
Every furnace is equipped with a button to reset the unit. Red or yellow, they are typically seen inside the blower chamber. When a problem, such as a hot or overheating furnace, is detected, the reset button is a safety feature. It shuts down the furnace before it reaches the circuit breaker.
It is not uncommon for a furnace to require the control panel to be reset occasionally. However, if the furnace needs to be reset frequently, you should get it inspected by a specialist performing furnace repair in Severna Park, MD. Contact an expert and appropriately licensed HVAC specialist, from JS Corcoran Heating & Air Conditioning.
2. Location of the Reset Button on the Device.
The manufacturer and model of your furnace will indicate where the reset button is located. The reset button for your central heating and air conditioning system is found on the blower motor. If these systems are installed in your residence, it is typically bright red or yellow to grab attention.
The location of the blower motor varies on specific models. The reset button may not be readily apparent. To locate the switch that restarts the motor, you may need to reach the rear and the bottom. After finding the reset button, you must keep it down for up to a minute and a half until the furnace is reset.
3. How Does a reset button work?
Inside the furnace’s blower chamber is typically a button to reset the appliance. The red or yellow display makes it very easy to identify. The fundamental purpose of a reset button is to serve as a safeguard for the user. When the furnace temperature reaches a harmful level, it aids in cutting off the heat. Therefore, the furnace will not trip the circuit breaker even if it becomes excessively hot.
A furnace may occasionally require resetting, such as when it becomes excessively hot. When this occurs, it is wise to push the reset button. Alternatively, if your heating system is repeatedly resetting itself, it is most likely that the button to reset it is being mistakenly hit due to a fault. Google ‘furnace check-up near me’ online, if you encounter issues.
4. Resetting an Electric Furnace.
- Press the button to power down the device. If you cannot find it, you must turn off the circuit breaker directly connected to it.
- After opening the blower housing, the reset button may be located within.
- Please press the button and hold it until a click sounds.
- To turn on the furnace, you must flip the circuit breaker.
- The heating system will begin operating as soon as it receives commands from the thermostat.
For furnace repair in Severna Park, contact an expert and licensed HVAC specialist, such as JS Corcoran Heating & Air Conditioning. We provide furnace repair services to residential neighborhoods, light commercial buildings, and new construction sites. We also offer furnace inspection in Severna Park, MD.